Search :
LED Aviation Warning Lights - Twin Obstruction Lamps
Medium Intensity Twin Obstruction Lamps

Medium Intensity Twin LED Aviation Warning Light

LED Aviation Warning LightsThe major advantage of having a twin LED aviation warning light is that when the lowermost lights fail, the lighting switches onto its standby lighting system. This eliminates the eventuality of a complete blackout, during an unlikely circuit failure.

      These high power Omni-directional obstruction lamps are low on power consumption, which enables the unit to be operated on solar power—an obvious advantage in environments were power supplies are not readily available and countries lacking the necessary infrastructure. A standalone version with integral photocell is available. This type of fitting is suitable for obstruction markings on airports.

      It combines the improved and modern concept of surface mounted solid state lamps technology (High Powered Lighting Diodes) which are procured from market leaders. These, high power high flux, state lamps have an exceptionally long life of 50,000 hours. They consume very less energy and thus ideally suited for Solar Powered Applications.

The LED Aviation warning lights are mounted on very durable Epoxy masked PCB's which enables easy replacement in case of physical or technical damage.

Efficient secondary optics is induced to generate Lens effect to give an omni-directional light beam in horizontal plane & arrest unnecessary light dispersion in vertical plane as required by the light specifications.

Another unique characteristic of our twin obstruction light unit is its duplex nature. It helps in enhancing the reliability and durability of our product by automatically switching from Service lamp to Standby lamp.

These warning lights are rested inside an improved gasket, which protects them from the attack of dust and moisture. A (bird spike) is positioned over the top of the light to protect the lights from bird droppings.

These lights are built in a Photo controller to provide a 24x7 operation.

    Technical Specifications of Twin LED Aviation Warning Lights

    Operating Conditions
    • Temperatures ranging from -20°C to +55°C
    • Will withstand wind in excess of 150 mph (240 kph), (150 knots)
    • Fog, Rain
    • Humidity : 80%
    • Does not create Electromagnetic Interference
    • Does not create Radio Frequency Interference

    Photometric Data
    Night Mode Red
    Vertical Beam Spread > 3 °
    Horizontal Coverage 360 °
    "Ground Scatter Light" cut-off angle -5 °
    Flash Rate 20 - 60 FPM
    Electrical Specifications
    Input Supply Operating Voltage System Operating on DC Volts Current (Amp) Volt Amps (VA) Watts
    (V x I)
    Min Max Min Max Min Max
    220V AC with SMPS Supply 175 VAC 275 V AC 12 V 8 10 96 120 120
    24 V 4 5 96 120 120
    48 V 2 2.5 96 120 120
    220 VAC (50Hz) 175 VAC 275 VAC 12 V 8 10 96 120 120
    24 V 4 5 96 120 120
    48V 2 2.5 96 120 120
    Light Characteristics
    ICAO Type Type "B/C"
    Light Source LED Cluster
    Light Color RED
    Intensity > -2000 cd
    Horizontal Divergence 360 °
    Lamp Life > 1,00,000 hrs
    Radial Emission As per CISPR 11
    Physical Characteristics
    Body Material Cast Aluminium
    Lense Material Polished Acrylic
    Mounting Hot Dip Galvanized Structure
    Height (mm/inches) 544 mm
    Width (mm/inches) 395 mm
    Mass (Kg/lbs) 13.850 Kg Approx.
    Minimum Autonomy 24 hrs.
    Latitude Range 1000 meter
    On/Off Level Automatic
    Illumination Technology Photons generation with LED conduction
    Lifespan of LEDs > > 1,00,000 hrs. Approx.
    Available Flash Patterns 20 - 60 FPM
    Color Technology of LED Red Light Emitting Diode
    Environmental and Electrical
    Temperature Range - 20 ° C to + 50 ° C
    Waterproof Through EPDM Gasket and Sealant
    Environment Protection Standard for Light IP 65 Standard
    Environment Protection Standard for Control Panel IP 55 Standard
    Technical Details
    Cat No. Weight Dimensions Body Color Character
    TASS - MI - Duplex 23.590Kg Approx. Height : 740mm Diameter : 394 mm White / Optionally RED Flashing 20 to 60 Flash/min (Flash rate adjustable)

    Operational Voltage Color of Light Emitted
    12 V DC, 24 V DC, 48 V DC, 230 V AC RED

    Shipping Specifications

       Shipping details for LED medium intensity twin obstruction lights.

    Carton No. Carton Description Net Weight (KG) Gross Weight (KG) Dimn. Vol. CBM
    1 TASS-MI-DUPLEX 26 36 450x440x840 0.166
    2 Control Panel 14 20 550x465x255 0.065